Filler Words: What They Are, a Full List, and How to Cut Them From Speech and Transcripts
Filler words are sounds, words or short phrases such as um, uh, like, you know and I mean that fill a pause without adding meaning. Linguists call them fillers, filled pauses or discourse markers. Everyone uses them in speech. They become a problem when they pile up in a talk, a recording or a transcript.
This guide gives you a full list of filler words, sorted by type, with what each one usually signals. It also covers why people use them, which ones to cut first, how to stop using filler words when you speak, and how to get them out of a transcript or dictated text afterward.
What are filler words?
A filler word is any word or sound that holds a spot in a sentence while adding little or no meaning. Take it out and the sentence still says the same thing. "So, um, I think we should, like, move the launch" means the same as "I think we should move the launch."
Linguists use a few related terms. A filled pause or hesitation marker is a sound like um or uh. A discourse marker is a real word such as well, so or you know that steers the talk. Disfluency is the umbrella term for all the bumps in speech, including fillers, repeats and false starts. The Wikipedia entry on fillers is a good summary of the terms.
Why is speech so full of them? Speakers plan the next words while they are still talking. In their 2002 paper "Using uh and um in spontaneous speaking", Herbert Clark and Jean Fox Tree argue that a filler buys that planning time and tells the listener a delay is coming.
The full list of filler words, by type
No list can hold every filler, because almost any word can act as one. These six groups cover the ones you will hear and read most often. Each table shows what the filler usually signals.
Hesitation sounds (filled pauses)
| Filler | What it usually signals |
|---|---|
| um, erm | A longer pause while you find the words |
| uh, er | A short pause, often mid-sentence |
| ah | Searching for a word or a name |
| hmm, mm | Thinking it over, or mild doubt |
Discourse markers
| Filler | What it usually signals |
|---|---|
| like | Loose wording, an example, or a quote ("she was like...") |
| you know | Checking that the listener is with you |
| I mean | A fix or a rephrase is coming |
| so | Starting a turn or a new point |
| well | A pause before a reply, often a mild "no" |
| okay, right | Moving on, or asking for agreement |
| anyway | Going back to the main thread |
| you see, now, look | Calling for attention before a point |
Hedges and softeners
These soften a claim or a request: kind of, sort of, I guess, I think, I suppose, maybe, probably, a bit, a little, more or less, or something, and stuff, or whatever. One hedge sounds polite. Three in one sentence sound unsure.
Intensifiers and empty emphasis
These add force without adding facts: just, really, very, actually, basically, literally, totally, seriously, honestly, definitely, absolutely, simply, quite. "Honestly" and "actually" can also suggest the rest of what you said was less true.
Filler phrases
- at the end of the day
- to be honest, to tell you the truth
- the thing is
- what I'm trying to say is
- if that makes sense, does that make sense?
- and so on, and all that
- believe me, trust me
- needless to say
Filler words in writing
Writing has fillers too, and they are the ones teachers circle in essays. Common ones are that (when you can delete it), very, really, just, in order to, due to the fact that, it is important to note that, and sentences that open with "there is" or "there are".
Before: "It is important to note that there are really just three steps that you need in order to finish." After: "You need three steps to finish."
One last point: the same word can be a filler or a real word. "Like" in "I like it" is a verb, not a filler. "So" that opens a sentence usually is one, while "so" in "so tired" is not.
Why people use filler words (and when they help)
People rarely use filler words by accident. Each one does a small job:
- Planning time. The brain is still building the next phrase.
- Holding the floor. An "um" tells others you are not done talking.
- Softening. "Could you, kind of, take a look?" sounds less like an order.
- Signalling a fix. "I mean" warns the listener that you are about to correct yourself.
Fillers are not always bad for the listener, either. Jean Fox Tree's 2001 study, "Listeners' uses of um and uh in speech comprehension", found that hearing uh helped listeners recognize the next word faster, while um did not slow them down. Clark and Fox Tree also report that speakers tend to use um before a longer delay and uh before a shorter one.
The linguist Valerie Fridland makes a similar case in a Stanford GSB episode on filler words. Her point is that words like "so" and "like" carry a social message as well as a literal one.
So keep them when they fit. Casual talk, a podcast that should sound relaxed, and a quote that must be word for word all sound wrong with every filler scrubbed out. A brain dump by talking is another place where ums do no harm, since the goal is to get ideas out, not to polish them.
Filler words to avoid in presentations, interviews and meetings
If you want to cut back, start with the fillers that do the most damage when people are judging what you say:
- Um and uh in a prepared talk, where the audience expects you to know your lines.
- Like as a quote marker ("and he was like...") in any formal setting.
- You know and right? as tag questions at the end of every point.
- Basically and literally as empty emphasis.
- So as the opener of every sentence.
Presentations. A stream of fillers makes a talk sound less prepared than it is.
Job interviews. Hedges like "I guess" and "sort of" undersell your own work. Say "I led the project," not "I kind of led the project, I guess."
Meeting updates. A status update full of "basically" and "so, yeah" runs long and buries the one thing people need to know. Lead with the result, then stop.
How to stop using filler words when you speak
You will not get to zero, and you do not need to. An occasional um sounds human. The goal is fewer filler words, in the places that matter. These six steps work for "how to stop saying um" and for every other filler on the list.
- Record yourself and listen back. Give a two minute practice talk, then play it back and count your top two or three fillers by ear. With VoiceSnap Pro voice notes on Mac or Windows, hold Right Command (Mac) or Right Ctrl (Windows), or press Control+Option+N or Ctrl+Alt+N hands-free, and give the talk. If Keep recordings is set to Forever or 30 days, the recording stays with the note so you can replay it and compare a later run. Transcription needs an internet connection.
- Swap the filler for a silent pause. Common coaching advice is that a one second pause sounds much shorter to the audience than it feels to you. Close your mouth, breathe, then go on.
- Slow down and end sentences on purpose. Fillers creep in when you chain thoughts with "and um" or "so". Finish the sentence, stop, then start the next one.
- Prepare your first and last lines. Fillers cluster at the start of a talk and at transitions. Know exactly how you will open, how you will move between points, and how you will close.
- Practise with a counter. Toastmasters clubs give one member the Ah-Counter role, which tracks every filler a speaker uses. A friend who taps the table each time you say um works too.
- Rehearse with a script, then without it. Read the talk from the free online teleprompter a few times, then give it from notes. Check its length with the speech time calculator. For writing the script itself, see how to write a video script.
Filler words in transcripts and dictated text
Most filler word guides stop at public speaking. But many people now meet their own fillers in writing: in a meeting transcript, an interview, or a draft they spoke instead of typed.
Verbatim vs clean verbatim
Professional transcription comes in two main styles. Verbatim keeps every um, false start and repeat. Clean verbatim (also called intelligent verbatim) drops those while keeping the meaning and the speaker's words.
- Use verbatim when the exact wording matters: research interviews, legal records, or a quote you will publish.
- Use clean verbatim for notes, articles, summaries and anything people will read for content.
Speech-to-text tools differ
Automatic speech-to-text tools do not all treat fillers the same way. Some keep them, some drop them, and some give you a setting. Results also change with the audio: a clear voice in a quiet room comes out differently from a fast talker on a noisy call. Check your own tool's output instead of assuming. For how speech models turn audio into text in the first place, see AI speech to text explained.
Spoken drafts still read like talk
Even with every um gone, a spoken draft can read like speech. Restarts, "so" at the start of sentences, and hedges like "I think" tend to survive. If you draft by voice, as in talk to text on a computer, plan a quick edit pass for these.
How to remove filler words from a transcript
This four step workflow takes a messy transcript to clean, readable text in a few minutes.
- Strip the transcript furniture first. Paste the text into the free transcript cleaner to remove timestamps, speaker labels, [inaudible] markers and caption line breaks. It does not touch fillers, so this is only the first pass.
- Remove the filler words. Paste the result into the free text cleaner. Its "Remove filler words" pass gives each filler its own switch and repairs the punctuation left behind, and the "Meeting transcript" preset turns on the usual passes in one click. Both tools run in your browser, and the pages say nothing you paste is uploaded.
- Do a human pass. No find and replace can judge context. Keep "like" when it means "similar to", keep "so" when it means "therefore", and keep hedges inside a direct quote. Reword any restart that still reads badly.
- Keep the raw copy. If you might need verbatim later, save the original transcript and clean a copy.
Here is a short before and after:
Before: "So, um, I think we should, like, you know, move the launch to, uh, to Thursday. I mean, basically the build isn't, isn't ready yet."
After: "I think we should move the launch to Thursday. The build isn't ready yet."
Once a meeting transcript is clean, the next job is usually pulling out the action items: who does what, by when.
Frequently Asked Questions
What are examples of filler words?
Common examples of filler words are um, uh, like, you know, I mean, so, basically, actually, literally and kind of. They fall into hesitation sounds, discourse markers, hedges, intensifiers and filler phrases, as in the full list above.
Is OK a filler word?
Sometimes. "Okay, so, here's the plan" uses it as a filler to open a turn. "Is that okay?" uses it as a real word with a real meaning.
Are filler words always bad?
No. Research by Fox Tree found that uh helped listeners recognize the next word faster. In casual talk, a podcast or a verbatim quote, a few fillers belong there.
How do you stop saying um?
Record yourself and count your ums. Then replace each one with a short silent pause, slow down, prepare your opening and transitions, and practise with someone counting.
Can you remove filler words from a transcript automatically?
Yes, for the obvious ones. Use the free text cleaner to remove filler words from a transcript, then read it through, since words like "like" and "so" still need a human call.
To hear your own fillers, save your practice runs as voice notes you can play back, and draft by voice when typing slows you down. VoiceSnap Pro runs on Mac (Apple silicon, macOS 13 or later) and Windows 10 21H2 or Windows 11: hold a shortcut, speak, and punctuated text is typed at your cursor in any app. Download free, free to start, no card. Pro is $9 a month when you need unlimited transcription and manual AI actions, subject to fair use.